Forum Replies Created
-
AuthorPosts
-
May 21, 2024 at 10:35 AM in reply to: Set Settings Page Custom Field data and be able to choose it from a CPT page #45481
SoloAnt
ParticipantHi @peter can this be set up with Meta Box AIO views? Or does it need to be set up with a template in another way? If another way can you point me in the right direction, please?
Thank you
May 17, 2024 at 9:47 AM in reply to: Set Settings Page Custom Field data and be able to choose it from a CPT page #45450ParticipantFor anyone seeing this, I got question 2 figured out.
I had to put in the 'mb_' followed by the Meta Box Settings page ID, followed by the Custom Field Group ID, followed by the Custom Field ID.
In my case
{mb_sweeps-settings_dates_start_date:m/d/Y}And the ':' followed by the date format I wanted to display on the front end.
Hope others might find this helpful if you come across a similar need.👍
December 16, 2023 at 3:04 AM in reply to: ✅MB Revisions in combination with MB Custom Table and Custom Post Type #44104ParticipantHi @Anh Tran, this seems to be a problem again, where only the cpt title is being displayed and none of the field data. Any fixes for this?
I have revision true set on the field group within the custom settings.
I'd like to be able to see when a particular custom field was edited and what it's new value was updated to.
OR does something else need to be configured to make the fields show up in the revisions?
October 3, 2023 at 2:01 AM in reply to: ✅Bricks Builder Metabox links within a group nested in group are not working #43416ParticipantHi Peter, thank you for the update here. I'll check with the Bricks team
Thanks again.
September 30, 2023 at 10:23 AM in reply to: ✅Bricks Builder Metabox links within a group nested in group are not working #43390ParticipantThe image is broken above trying this one here.
ParticipantHi Peter, here are the two images.
Before:
https://www.dropbox.com/s/dfrulvd0matzhor/CleanShot%202023-06-13%20at%2016.21.30%402x.png?dl=0After:
https://www.dropbox.com/s/sit574w1pftfdci/CleanShot%202023-06-13%20at%2016.29.24%402x.png?dl=0I think I got it figured out by looking at the database.
You need to map the latitude and longitude to the map field created.
I'm running a few more tests to make sure but if my tests end up working out, you'll probably want to update your docs noting that because from my searches about getting it to work, there is no mention of that at all.
You might want to test on your end too. I'll let you know my findings.👍
ParticipantHi Peter, can you take a look at this video, please?
You will see there are imported locations, and the imported data is acting as it's not registering the "Location Map Address" data until after you open the location and the page fully loads, and then you hit save/update.
In the video, you can see that there is what appears to be some default map area and once the page finishes loading you can see the map jump to the input location. It happens fast but you can catch it if you know what you're looking for.
Bulk editing and updating as you suggested above isn't doing a thing, you have to physically open each location and have it register the location in that split second and hit update.
How would you force that location to register in the post type without needing to open each location one by one?
ParticipantHi Peter, noted, I'll check with them as well.
I also tried the bulk update as you suggested before as well—no luck there either.
Much appreciated!
ParticipantHi Peter, I thought I'd record a quick video to show you what is going on, it might give you a clearer picture to what my problem is.
You can view it here: https://screencasts.tp-m.com/recordings/zNOqI69XjORztBqLD4Ll
Thank you,
ParticipantHi Peter, thanks for the reply.
I've taken a look at this post before I sent in my request above https://metabox.io/display-all-listings-on-a-map/?swcfpc=1. It seems this is for Open Maps and not Google Maps, am I missing something?
I can also get multiple pins to show up on the map but only after I open an imported location and hit save/update so that is where the problem is. If I import 1000 locations, I don't want to have to open each one and hit save/update just to have them show up on the map. So that's where the problem lies, they don't show up automatically after import and/or reindexing from WPgridbuilder.
Do any of the suggestions you mentioned have a remedy for that issue? Reading through them doesn't seem like it will fix the issue I'm having.
Thanks again, talk soon
-
AuthorPosts
